CO2 laser tube cooler Industrial Chiller S&A CW-5200 industrial chiller

CW-5200 industrial water chiller is designed for a variety of applications, including CO2 laser machine, laboratory equipment, UV printer, CNC router spindle and other small-medium power machines that require water cooling. It’s capable of cooling the water below ambient temperature.

Although CW-5200 chiller measures only 58*29*47(L*W*H), its cooling power can not be underestimated. Featuring ±0.3℃ temperature stability and 1400W cooling capacity, this recirculating compressor water chiller does a great job in reducing the operating temperature of the equipment to the temperature range of 5-35 ℃. 

It comes programmed with constant temperature mode and intelligent temperature control mode. The intelligent temperature control mode allows for automatic water temperature adjustment as the ambient temperature changes. 

The warranty period is 2 years.

  Features  

1. 1400W cooling capacity. R-410a or R-407c eco-friendly refrigerant;
2. Temperature control range: 5-35 ℃;
3. ±0.3°C high temperature stability;
4. Compact design, long service life, ease of use, low energy consumption;
5. Constant temperature and intelligent temperature control modes ;
6. Integrated alarm functions to protect the equipment: compressor time-delay protection, compressor overcurrent protection, water flow alarm and over high / low temperature alarm;
7. Available in 220V or 110V. CE, RoHS , ISO and REACH approval;
8. Optional heater and water filter

  Specification  

Note: 
1. The working current can be different under different working conditions; The above information is for reference only. Please subject to the actual delivered product;
2. Clean, pure, impurity free water should be used. The ideal one could be purified water, clean distilled water, deionised water, etc.;
3. Change out the water periodically (every 3 months is suggested or depending on the actual working environment). 
4. Location of the chiller should be well ventilated environment. There must be at least 30cm from the obstacles to the air outlet which is on the back of the chiller and should leave at least 8cm between obstacles and the air inlets which are on the side casing of the chiller. 

  PRODUCT INTRODUCTION  

Intelligent temperature controller that offers automatic water temperature adjustment.